 Tite-Loc-HS
Tite-Loc HS Panels combine structural panel performance
with architectural panel aesthetics. Tite-Loc HS Panels are corrective
leveled to provide superior panel flatness. A factory-applied sealant
bead is applied for additional weather resistance. Maximum panel length
is 64 feet and minimum panel length is 4 feet. Consult factory for longer
lengths.
Tite-Loc HS Panels feature a 2” leg height that
requires mechanical field seaming after installation. Panels have a
concealed-fastener floating clip system designed to allow for thermal
expansion/contraction. For further details, please contact PAC.
Trim
All flashing and trim will be fabricated by manufacturer or qualified
fabricator. Flashing shall be PAC-CLAD aluminum (.032-.063 gauge as
specified) or PAC-CLAD steel (24 ga. or 22 ga. as specified). A 20 year,
non-prorated finish warranty can be supplied covering finish performance.
Installation
Tite-Loc HS Panels are intended for use in architectural and structural
roofing. Substrates may include 5/8” (min.) plywood, nailboard
insulation or equal with an underlayment of ice and water shield or
30# (min.) roofing felt applied horizontally from eave to ridge. Other
substrates may include metal decking, purlins or rigid insulation in
conjunction with bearing plates.
A minimum 1/2:12 pitch is required. Contact Petersen
for further detail assistance on projects. For Coastal applications,
aluminum panels along with stainless steel clips must be used for warranty.
Consult a local architect/engineer for compliance with local codes and
conditions.
Contact
Conklin today for a FREE estimate regarding our exclusive
line of Pac Clad, Pac-Clad
Colors, Snap-Clad, Tite-Loc,
Tite-Loc Plus, Tite-Loc
HS, Snap-On Standing Seam,
High Snap-On Standing Seam,
Snap-On Batten, Redi-Roof
Standing Seam, Integral
Standing Seam, Integral Batten,
Edge-Loc, 7.2
Panel, 1/2" &
7/8" Corrugated, R-41 &
R-36 Panels, Snow Guards and Pac
Solar Series
|
